Mechanical · Spokane Valley

Attic, spray foam and home insulation in Spokane Valley

Attic, spray foam and home insulation for homeowners, landlords and property managers in Spokane Valley and across Washington. Tell us what needs doing, where and when, and we reply with a price or with the questions we need answered to price it.

Attic, spray foam and home insulation: what we cover in Spokane Valley

  • Air SealingGaps around pipes, wires, chimneys, pot lights and the attic hatch sealed before insulation goes in.
  • Basement InsulationBasement walls and rim joists insulated with spray foam or rigid foam board, ready for finishing.
  • Crawl Space InsulationCrawl space walls and rim joists insulated and the ground covered with a sealed vapour barrier.
  • Wall InsulationBatts, mineral wool or spray foam in open walls during renovations, or dense-pack in closed walls.
  • Old Insulation RemovalWet, compressed or rodent-damaged attic insulation vacuumed out before new material goes in.
  • Attic InsulationAttics brought up to a deep, even layer of insulation, with baffles at the eaves to keep the roof vented.
  • Spray Foam InsulationClosed-cell and open-cell spray foam for rim joists, basement walls, cathedral ceilings and tight cavities.
  • Blown-In InsulationLoose-fill cellulose or fibreglass blown into attics and dense-packed into closed walls.

Working in Spokane Valley

Mild temperatures hide the real problem, which is moisture, so insulation work focuses on venting attics and keeping crawl spaces dry. Ask whether old damp or moldy insulation will be removed first and how the vapour barrier on the crawl space floor will be handled.

Washington's aerospace (Boeing), tech (Microsoft, Amazon), and Seattle-Tacoma port concentrations operate in a marine-mild climate west of the Cascades and a drier semi-arid climate to the east.

How a job goes

  1. RequestYou describe the house in your email: cold rooms, drafts, ice dams, high bills, or a renovation coming up.
  2. InspectA local specialist checks insulation depth and type, air leaks, attic ventilation, moisture and any old vermiculite.
  3. PlanThe areas that make the biggest difference are picked first, with a material and a target R-value for each.
  4. QuoteWritten quote with the areas, materials, R-values, air sealing, ventilation work, prep and cleanup.
  5. InstallWork done to the agreed scope, followed by a walkthrough with you.

Every written quote covers

  • Areas to be insulated
  • Material and target R-value per area
  • Air sealing included or not
  • Ventilation and baffles
  • Old insulation removal, if needed

Questions

Do you take attic, spray foam and home insulation jobs in Spokane Valley?

Yes. Requests from Spokane Valley, Seattle, Olympia, Spokane and the rest of Washington are handled the same way. Use the quote form on this page, or email [email protected] with the service, the address and the timing.

Can you insulate walls without opening them?

Often, yes. Older houses with empty wall cavities can be dense-packed with cellulose through small holes drilled in the siding or the inside wall, which are then plugged and patched. Walls that already have some insulation, or that are blocked inside, may not be good candidates, so the specialist checks before quoting.

There is grey-brown pebble insulation in my attic. Is that a problem?

That is probably vermiculite, and some vermiculite contains asbestos. Do not disturb it or store things on it. It needs to be tested, and if it contains asbestos it has to be removed by a qualified abatement contractor before any insulation work goes ahead. Mention it in your email so the right specialist reviews your request.

Are there rebates for insulation?

Sometimes. Utilities, provinces, states and federal programs in Canada and the US have offered rebates or tax credits for insulation and air sealing, but they change often and many require an energy assessment before and after the work. Check what is available in your area before you sign, and ask for an itemized quote you can submit.

How long does an insulation job take?

An attic top-up on a typical house is often done in a day. Spray foam in a basement usually takes a day or two, plus time for the foam to cure before anyone goes back in. Dense-packing walls or removing old insulation takes longer. The written quote should give the timeline and any time you need to stay out of the house.

How do I get a quote?

Email us your city, the type of house, the areas you want insulated and what you are noticing, such as cold rooms, drafts or ice dams. A specialist who works in your area follows up to look at the house and give you a written quote. Requesting a quote is free and there is no obligation to go ahead.

Request a quote

Tell us what needs doing, where and when. We reply by email with a price, or with the questions we need answered to price it.

Prefer email? Write to [email protected].

Contractors and trade companies

Register your company to be considered for work in your trade and service area.

Join our contractor network