Windows and exterior · Kelowna
Seamless gutters, guards and downspouts in Kelowna
Seamless gutter installation, gutter guards, downspouts, gutter cleaning and gutter repair for homes and small buildings across Canada and the US. Request a free quote online. Requests from Kelowna and nearby towns are handled the same way: one request with the job, the address and the timing.
Seamless gutters, guards and downspouts: what we cover in Kelowna
- Gutter RepairLeaking seams and corners resealed, loose hangers replaced, sagging runs re-pitched.
- Fascia & Soffit RepairRotted fascia boards replaced and wrapped so new gutters have something solid to hang on.
- Heat Cables & Ice Dam PreventionHeat cables on the roof edge, in the gutters and down the downspouts to keep meltwater moving in winter.
- Seamless Gutter InstallationAluminum gutters formed on site to the exact length of each run, with joints only at corners and outlets.
- Gutter ReplacementOld, rusted, undersized or sectional gutters taken down and replaced, with the fascia checked behind them.
- Gutter GuardsStainless mesh, reverse-curve and screen guards matched to your trees and your roof.
- Downspouts & ExtensionsNew or larger downspouts, extensions and underground lines that carry water away from the foundation.
- Gutter CleaningGutters cleared by hand, debris bagged and taken away, downspouts flushed and checked for flow.
Working in Kelowna
Moss, needles and long rainy seasons keep gutters full and wet, and overflows rot fascia and soak foundations. Ask for cleaning in late fall and late spring, guards that keep out needles and moss, and downspouts that discharge well clear of the house.
British Columbia's coastal mild-marine climate and concentration of port, film, and biotech operations along the Lower Mainland and Vancouver Island shape what facility programs need to look like here.
How a job goes
- RequestYou describe the job in your email: overflowing, leaking, sagging, clogged, or gutters you want replaced.
- InspectA local specialist checks the gutters, their pitch, the fascia, the downspouts and where the water lands around the house.
- MeasureEach run is measured, the roof area and pitch are noted, and the gutter size, profile and number of downspouts are worked out.
- QuoteWritten quote with the material, colour, gutter size, downspouts, guards if you want them, and removal of the old gutters.
- InstallWork done to the agreed scope, followed by a walkthrough and a water test where possible.
Every written quote covers
- Gutter size and profile
- Material, thickness and colour
- Number and size of downspouts
- Guards, if you want them
- Removal of the old gutters
Questions
Do you take seamless gutters, guards and downspouts jobs in Kelowna?
Yes. Requests from Kelowna, Vancouver, Victoria, Burnaby and the rest of British Columbia are handled the same way. Use the quote form on this page, or email [email protected] with the service, the address and the timing.
Why is water getting into my basement near a downspout?
A downspout that empties right at the wall puts a whole section of roof water against the foundation. Extensions, splash blocks or an underground line that carries water well away from the house usually help a lot. If water still gets in after that, the foundation itself may need a look.
What about ice dams and icicles in winter?
Ice dams form when heat escaping from the attic melts snow that refreezes at the cold roof edge. Heat cables along the roof edge, in the gutters and down the downspouts keep a path open for meltwater, and well-anchored gutters hold up better under ice. Attic insulation and ventilation deal with the cause, so it is worth looking at both.
How do I get a quote?
Email us your city, the service you think you need and what you are seeing. Mention the number of storeys and roughly how much gutter the house has, if you know. A specialist who works in your area follows up to look at the house and give you a written quote. Requesting a quote is free and there is no obligation to go ahead.
Are seamless gutters worth it?
For most houses, yes. Sectional gutters have a joint every 10 feet or so, and every joint is a place for leaks and rust to start. Seamless aluminum gutters are formed on site to the full length of each run, so the only joints are at the corners and downspout outlets. They usually cost more than DIY sectional gutters and less than copper or steel.
What size gutters do I need, 5-inch or 6-inch?
Five-inch K-style gutters with 2x3 downspouts suit many houses. Large roof areas, steep pitches, long runs and places with heavy downpours often need 6-inch gutters with 3x4 downspouts. The right size depends on how much roof drains into each run, the pitch and local rainfall, which is why the specialist measures before quoting.
Seamless gutters, guards and downspouts near Kelowna
Request a quote
Tell us what needs doing, where and when. We reply by email with a price, or with the questions we need answered to price it.
Contractors and trade companies
Register your company to be considered for work in your trade and service area.