Mechanical · Wilmington
Electrical upgrades and repairs in Wilmington
Need electrical upgrades and repairs in Wilmington? Send the job, the address and your timing with the form below. We reply with a price, or ask for what we need to price it.
Electrical upgrades and repairs: what we cover in Wilmington
- Home RewiringKnob-and-tube, aluminum and ungrounded wiring replaced in older homes, with as few wall openings as possible.
- EV Charger InstallationLevel 2 charger circuits for garages and driveways, with a load check and load management when the panel is near capacity.
- Lighting InstallationPot lights, fixtures, under-cabinet and outdoor lighting, dimmers and switches, for renovations and existing rooms.
- Generators & Transfer SwitchesStandby generators, and inlets with transfer switches for portable generators, so backup power is connected safely.
- Electrical Repairs & TroubleshootingBreakers that keep tripping, dead outlets, flickering lights, warm switches and other faults traced and fixed.
- New Circuits, Outlets & GFCIDedicated circuits for kitchens, heat pumps, workshops and hot tubs, plus new outlets and GFCI and AFCI protection.
- Electrical InspectionsCondition checks for older homes, home purchases and insurance questions, with written findings and priorities.
- Panel & Service UpgradesOld fuse boxes and full panels replaced, and 60 or 100 amp services upgraded for heat pumps, EVs and additions.
Working in Wilmington
Summer air conditioning and winter heating both push older panels hard, so service upgrades are common before either peak season. Damp basements and garages also need ground-fault protection, and a good quote explains which circuits will get it and whether outdoor outlets are included.
Delaware combines a corporate-services concentration, port logistics on the Delaware River, and chemicals manufacturing, in a humid-continental climate with significant coastal humidity exposure.
How a job goes
- RequestYou describe the job in your email: what you want to add or fix, the age of the house and the panel, with photos if you have them.
- AssessA local electrician looks at the panel, the service, the existing wiring and the space where the work will happen.
- PlanWork out the load, the circuits and the wiring route, and check which permits and utility steps are needed.
- QuoteWritten quote with the scope, materials, permits, inspection, utility coordination and any wall or ceiling repair.
- InstallWork done to the agreed scope and inspected where required, followed by a walkthrough with you.
Every written quote covers
- Load calculation where needed
- Scope and materials in writing
- Permits and inspection flagged
- Utility coordination spelled out
- Wall and ceiling repair stated
Questions
Do you take electrical upgrades and repairs jobs in Wilmington?
Yes. Requests from Wilmington, Dover, New York, Los Angeles and the rest of Delaware are handled the same way. Use the quote form on this page, or email [email protected] with the service, the address and the timing.
How much does a panel or service upgrade cost?
It varies a lot. Replacing a panel on the same service is a smaller job than going from 100 to 200 amps, which can involve a new meter base, new service cable, utility coordination and sometimes a new mast or trenching. Permits, inspection, the number of circuits to move and access all affect the price. The reliable number is a written quote after an assessment.
Is knob-and-tube or aluminum wiring dangerous?
Neither is automatically dangerous, but both are old technology. Knob-and-tube has no ground and its insulation gets brittle with age, and early aluminum branch wiring can overheat at connections. Many insurers ask about both. An inspection shows their condition and whether a repair, a partial rewire or a full rewire makes sense.
Do I need a permit for electrical work?
In most places, yes, for anything beyond swapping a fixture or device like for like, and the work is inspected by the local electrical authority. The rules depend on your province or state and your municipality. A proper quote should say which permits are needed and who takes care of them.
Can I connect a portable generator to my house?
Only through a transfer switch or an approved interlock and inlet, never by plugging it into an outlet. A proper connection keeps the generator from feeding power back into the utility lines, where it can injure line workers. A standby generator with an automatic transfer switch is the hands-off option.
My breaker keeps tripping. What should I do?
A breaker that trips is doing its job: the circuit is overloaded or there is a fault. Unplug what is on the circuit and reset it once. If it trips again right away, or you smell burning or see scorch marks, leave it off and request an assessment.
Electrical upgrades and repairs near Wilmington
Other services in Wilmington
Request a quote
Tell us what needs doing, where and when. We reply by email with a price, or with the questions we need answered to price it.
Contractors and trade companies
Register your company to be considered for work in your trade and service area.