Mechanical · Juneau
Electrical upgrades and repairs in Juneau
Electrical panel and service upgrades, rewiring, EV charger circuits, lighting, generators and electrical repairs for homes and small buildings across Canada and the US. Request a free quote online. Requests from Juneau and nearby towns are handled the same way: one request with the job, the address and the timing.
Electrical upgrades and repairs: what we cover in Juneau
- Panel & Service UpgradesOld fuse boxes and full panels replaced, and 60 or 100 amp services upgraded for heat pumps, EVs and additions.
- Home RewiringKnob-and-tube, aluminum and ungrounded wiring replaced in older homes, with as few wall openings as possible.
- EV Charger InstallationLevel 2 charger circuits for garages and driveways, with a load check and load management when the panel is near capacity.
- Lighting InstallationPot lights, fixtures, under-cabinet and outdoor lighting, dimmers and switches, for renovations and existing rooms.
- Generators & Transfer SwitchesStandby generators, and inlets with transfer switches for portable generators, so backup power is connected safely.
- Electrical Repairs & TroubleshootingBreakers that keep tripping, dead outlets, flickering lights, warm switches and other faults traced and fixed.
- New Circuits, Outlets & GFCIDedicated circuits for kitchens, heat pumps, workshops and hot tubs, plus new outlets and GFCI and AFCI protection.
- Electrical InspectionsCondition checks for older homes, home purchases and insurance questions, with written findings and priorities.
Working in Juneau
Electrical failures in deep cold can quickly freeze a house, so heat trace, backup power and reliable heating circuits come first. Parts and qualified trades are scarce in remote areas, which makes it smart to bundle work into one visit and ask what spare breakers and fittings will be left on site.
Juneau is Alaska's capital, accessible only by air or sea, and a primary state-government and tourism centre. Alaska runs on oil, fisheries, defence, and freight aviation in a subarctic climate where extreme cold, daylight swings, and remote-camp logistics define every facility decision.
How a job goes
- RequestYou describe the job in your email: what you want to add or fix, the age of the house and the panel, with photos if you have them.
- AssessA local electrician looks at the panel, the service, the existing wiring and the space where the work will happen.
- PlanWork out the load, the circuits and the wiring route, and check which permits and utility steps are needed.
- QuoteWritten quote with the scope, materials, permits, inspection, utility coordination and any wall or ceiling repair.
- InstallWork done to the agreed scope and inspected where required, followed by a walkthrough with you.
Every written quote covers
- Load calculation where needed
- Scope and materials in writing
- Permits and inspection flagged
- Utility coordination spelled out
- Wall and ceiling repair stated
Questions
Do you take electrical upgrades and repairs jobs in Juneau?
Yes. Requests from Juneau, Anchorage, New York, Los Angeles and the rest of Alaska are handled the same way. Use the quote form on this page, or email [email protected] with the service, the address and the timing.
Do I need a panel upgrade for an EV charger?
Not always. It depends on the size of your service, what the house already draws and the charger you choose. A load calculation answers the question. If the panel is close to capacity, an energy management device that limits charging while the house is drawing a lot can sometimes avoid a full service upgrade.
How much does a panel or service upgrade cost?
It varies a lot. Replacing a panel on the same service is a smaller job than going from 100 to 200 amps, which can involve a new meter base, new service cable, utility coordination and sometimes a new mast or trenching. Permits, inspection, the number of circuits to move and access all affect the price. The reliable number is a written quote after an assessment.
Is knob-and-tube or aluminum wiring dangerous?
Neither is automatically dangerous, but both are old technology. Knob-and-tube has no ground and its insulation gets brittle with age, and early aluminum branch wiring can overheat at connections. Many insurers ask about both. An inspection shows their condition and whether a repair, a partial rewire or a full rewire makes sense.
Do I need a permit for electrical work?
In most places, yes, for anything beyond swapping a fixture or device like for like, and the work is inspected by the local electrical authority. The rules depend on your province or state and your municipality. A proper quote should say which permits are needed and who takes care of them.
Can I connect a portable generator to my house?
Only through a transfer switch or an approved interlock and inlet, never by plugging it into an outlet. A proper connection keeps the generator from feeding power back into the utility lines, where it can injure line workers. A standby generator with an automatic transfer switch is the hands-off option.
Electrical upgrades and repairs near Juneau
Other services in Juneau
Request a quote
Tell us what needs doing, where and when. We reply by email with a price, or with the questions we need answered to price it.
Contractors and trade companies
Register your company to be considered for work in your trade and service area.